SC-FC duplex OM3
Feature
Excellent mechanical endurance
High credibility and stability
Good in repeatability
Specifications
|
End A ( FC ) |
Dust Cap Color |
Connector Type |
Connector Color |
Boot Type |
Boot Color |
|
Transparent |
FC/APC FC/UPC FC/PC |
Silver |
Standard |
Blue and Yellow Black and Red |
|
|
End B (SC ) |
Dust Cap Color |
Connector Type |
Connector Color |
Boot Type |
Boot Color |
|
Transparent |
SC/APC SC/UPC SC/PC |
Blue Green Beige Aqua Violet |
Standard |
Green Blue and Yellow Red and Black |
|
|
Cable |
Fiber Type |
Cable Type |
Cable OD |
Jacket Color |
Jacket Material |
|
SM G652D 9/125 SM G657A1 9/125 SM G657A2 9/125 MM OM1 62.5/125 MM OM2 50/125 MM OM3 50/125 MM OM4 50/125 |
Round |
2.1mm 3.0mm |
Yellow Grey Orange Aqua
|
LSZH |
|
|
Duplex |
2.0X4.1mm 2.8X5.7mm |
Technical Data
|
Fiber Type |
Connector Type |
Insertion Loss |
Return Loss |
Repeatability |
Durability |
Operating temperature |
|
SM
|
UPC |
≤0.2dB |
≥55dB |
≤0.2 |
＞1000 |
-20~75℃ |
|
APC |
≥65dB |
|||||
|
MM
|
PC |
≤0.1dB |
/ |
ALLNA TECHNOLOGY (SHENZHEN) CO.,LTD
Address: Room 302, 3Floor,C building Dakan Technology Garden, Xili Town, Nanshan District,Shenzhen city, China.
Tel: 86-755-86330891,86330892,86330893
Fax: 86-755-86330896
E-mail: sales@anatfiber.com
86-755-86330891
sales@anatfiber.com
QR CODE
quality system >
Quality Policy
It is the goal of ANAT to continually deliver safe, effective, high-quality
products and services on time to our customers. We focus on the quality control
during the production, the management control of the production line and the
control of the quality system, each employee has his/her responsibility for the
quality of the product.
Quality, customer satisfaction, continual improvement and the maintaining of the effectiveness of the quality management system, and the compliance with customer and regulatory requirements, are the responsibility of every employee.
Customer Satisfaction
Our success depends on customer satisfaction. We strive for extraordinary
performance in every area of our business. We will have satisfied customers
only when we understand customer's needs, requirements and preferences.
Error-Free Products and Services On Time
Every employee is responsible for the quality of the product. Our goal is to
reduce variability to achieve zero defect. A common set of metrics is used to
measure, report and driven the improvement. Each defect must be eliminated by
systematic correction and preventive measures.
Continual Improvement
Best demonstrated practices will be identified and implemented throughout the company, with a continuing challenge to identify opportunities for innovation and improvement. An important method for improvement is the motivation, education and development of all employees. This is a joint responsibility shared between employees and management.
